Replacement coils & coils in stock
Replacement coils
If you need to replace an old coil or your existing coil has failed, we will be happy to help you find a new one.
This may be a coil with the same design as before, an equivalent alternative or a solution where we also adapt the material, capacity or design to meet current requirements.
We help you find the right coil
We have an extensive archive going back many years. If the original heat exchanger was supplied by us, there is therefore a good chance that we already have the information needed to produce a replacement coil.
A photo of the nameplate on the coil often provides much of the information we need.
If there is no nameplate, you can use our guide “How to measure the coil”. You do not need to have all the information yourself. Send us what you have, preferably together with photos, and we will help you from there.
Even when the available information is limited, we can usually find a solution.
More than just the right dimensions
If a coil has failed, it may also be worth looking at why.
Conditions in the installation may have changed since the original coil was installed, the material may be less suitable for the current environment or the operating conditions may affect its service life.
A heat exchanger that is correctly sized and adapted to the environment and operating conditions can provide reliable performance for many years.
There are many options when it comes to design, materials and surface treatment. By selecting the right heat exchanger for the right conditions, you can extend its service life, reduce maintenance requirements and achieve an energy-efficient solution.
We have been working with heat exchangers for more than 50 years and offer both extensive expertise and a broad product range.
Measuring coils
Do you have a coil that has been damaged by freezing, or that needs replacing for another reason? We will be happy to help you find a new one.
Complete the form with all the information you have about the coil you would like to replace, and we will contact you as soon as possible.
Coils in stock
Most of our heat exchangers are sized and adapted to each individual project and manufactured to order.
In some cases, the requirements are more standardised and fast delivery is important. For these situations, we keep a selected range of coils in stock.
Our coils in stock meet the same standards as our other coils and can be delivered within just a few days.
We keep DX coils, heating coils and cooling coils in stock in several different sizes and designs. The coils are fitted with a nameplate in accordance with AMA VVS & KYL 16.
If you would like a quotation or wish to order a coil from stock, we will be happy to help.
Contact us and we will help you find out whether we have an option that meets your needs.
Coils in stock – range
Heating coils HW
Aircoil heating coil with slide-in connection, type A (HW-GA)
HW coils in stock are available in dimensions 800 × 400, 1000 × 500 and 1200 × 600 mm.
Supplied as standard for horizontal airflow. Construction depth 124 mm.
- Copper tubes
- Aluminium fins
- Hot galvanised sheet steel casing
Heating coils CH-W
Aircoil heating coil with circular connection for heating air with water.
CH-W coils in stock are available in dimensions Ø 200, 250, 315, 400 and 500 mm.
Supplied as standard for horizontal airflow. Construction depth 350–500 mm, depending on the on the selected connection.
- Copper tubes
- Aluminium fins
- Hot galvanised sheet steel casing
Cooling coils CC-W
Aircoil cooling coil with circular connection for cooling air with water.
CC-W coils in stock are available in dimensions Ø 315, 400 and 500 mm.
Supplied as standard for horizontal airflow. Construction depth 500 mm.
- Copper tubes
- Aluminium fins
- Hot galvanised sheet steel casing
- Stainless steel drip tray
Evaporator coils CC-E
Aircoil duct coil with circular connection for cooling air with refrigerant.
CC-E coils in stock are available in dimensions Ø 315, 400 and 500 mm, with 3 or 4 tube rows.
Supplied as standard for horizontal airflow. Construction depth 500 mm.
- Copper tubes
- Aluminium fins
- Hot galvanised sheet steel casing
- Stainless steel drip tray